Metalforming methods dedicated for aerospace industry

Metalforming methods dedicated for aerospace industry

Joanna Szyndler, Lukasz Madej

AGH University of Science and Technology, Al. Mickiewicza 30, 30-059, Krakow, Poland.

DOI:

https://doi.org/10.7494/cmms.2015.2.0533

Abstract:

Detailed analysis of different metalforming methods of light and durable integral elements dedicated for the aerospace industry is the main aim of the work. Description of an integral part concept as well as basis of conventional processes used for their manufacturing are presented within the paper. Then incremental forming processes with a division into sheet and bulk metal forming methods are precisely described. State of the art both in experimental and numerical research on these processes is discussed within the paper. Finally, recent concept of an alternative incremental forming process dedicated for manufacturing integral elements from lightweight alloys is presented. Particular attention is put on computer aided support of development of the innovative forming technology.

Cite as:

Szyndler, J., & Madej, L. (2015). Metalforming methods dedicated for aerospace industry. Computer Methods in Materials Science, 15(2), 294-310. https://doi.org/10.7494/cmms.2015.2.0533

Article (PDF):

Keywords:

Metalforming, Incremental forming, Multiscale numerical modelling, Integral elements

Publication dates:

Received: 23.02.2015, accepted: 29.03.2015, published:

Publication type:

Original scientific paper

References:

Alharthi, N., Bingol, S., Ventura, A., Misiolek, W., 2014, Analysis of extrusion welding in magnesium alloys – numerical predictions and metallurgical verification, Procedia Engineering, 81, 658-663.

Bidhar, S., Kuwazuru, O., Shiihara, Y., Utsunomiya, T., Hangai, Y., Nomura, M., Watanabe, I., Yoshikawa, N., 2015, Empirical formulation of stress concentration factor around an arbitrary-sized spherical dual-cavity system and its application to aluminum die castings, Applied Mathematical Modelling, in press, online available 13.03.2015, http://dx.doi.org/10.1016/j.apm.2015.01.032

Bouzakis, K.D., Maliaris, G., Tsouknidas, A., 2012, FEM-supported semi-solid high-pressure die casting process op- timization based on rheological properties by isothermal C compression tests at thixo temperatures extracted, Computational Materials Science, 59, 133-139. C Cawthorn, Cristopher J., Loukaides, Evripides G., Allwood, Julian M., 2014, Comparison of analitycal models for L A sheet rolling, Procedia Engineering, 81, 2451-2456. R

Chval, Z., Cechura, M., 2015, Monitoring extremely stressed A points of stands of forging presses, Procedia Engineering, 100, 841-846. N Ding, S., Meehan, P.A., Daniel, W.J.T., 2011, A novel sheet metal forming method – millipede forming, Journal of D O Materials Processing Technology, 211, 376-381. H

Feng, W., Yao, W., Jiang, P., 2014, Influence of eccentric on M movements of orbital head with double eccentric struc- R ture in orbital forging, Procedia Engineering, 81, 2348- 2354. U P Filicel, L., Fratin L., Micari F., 2002, Analysis of material form- M O ability in incremental forming, CIRP Annals – Manufac- C turing Technology, 51/1, 199-202. – 308

Groche, P., Fritsche, D., Tekkaya E.A., Allwood, J.M., Hirt G.,

Neugebauer, R., 2007, Incremental bulk metal forming, CIRP Annals – Manufacturing Technology, 56, 635-656.

Grosman, F., Madej, L., Ziolkiewicz, S., Nowak, J., 2012a, Experimental and numerical investigation on development of new incremental forming process, Journal of Materials Processing Technology, 212, 2200-2209.

Grosman, F., Tkocz, M., Pawlicki, J., Lipska, B., 2012b, Incremental forming of integral parts, Hutnik – Wiadomości Hutnicze, 79, 8, 583-586.

Guo, C., Ge, W., Lin, F., 2015, Effects of scanning parameters on material deposition during electron beam selective melting of Ti-6Al-4V powder, Journal of Materials Processing Technology, 214, 148-157.

Guzman, C.F., Duflou, J., Gu, J., Vanhove, H., Flores, P., Ha- braken, M., 2012, Study of the geometrical inaccuracy on a SPIF two-slope pyramid by finite element simulations, International Journal of Solids and Structures, 49, 25, 3594-3604.

Hussain, G., Gao, L., 2007, A novel method to test the thinning limits of sheet metals in negative incremental forming, International Journal of Machine Tools & Manufacture, 47, 419-435.

Hussain, G., Gaoa L., Dar N.U., 2007, An experimental study on some formability evaluation methods in negative incremental forming, Journal of Materials Processing Technology, 186, 45-53.

Isekia, H., Naganawa, T., 2002, Vertical wall surface forming of rectangular shell using multistage incremental forming with spherical and cylindrical rollers, Journal of Materials Processing Technology, 130-131, 675-679.

Jie, Z., Dongqi, Z., Pengwei, W., Gang, W., Feng, L.,Penglong, D., 2014, Numerical simulation research of investment casting for TiB /A356 aluminum base composite, Rare metal materials and Engineering, 43, 1, 47-51.

Jin, Y., Murata, M., 2004, Influence of pitch and cross-sectional ratio of strip of sheet metal on incremental in-plane bending, Journal of Materials Processing Technology, 155-156, 1810-1814.

Liu, G., Zhong, Z., Shen, Z., 2014, Influence of reduction distribution on internal defects during cross-wedge-rolling process, Procedia Engineering, 81, 263-267.

Luri, R., Luis, C.J., Salcedo, D., Leon, J., Fuertes, J.P., Puertas, I., 2013, FEM analysis of the isothermal forging of a connecting rod from material previously deformed by ECAE, Procedia Engineering, 63, 540-546.

Madej, L., Kruzel, F., Cybulka, P., Perzynski, K., Banas, K., 2012, Generation of dedicated finite element meshes for multiscale applications with delaunay triangulation and adaptive finite element – cellular automata algorithms, Computer Methods in Material Science, 12, 2, 85-96.

Madej, L., Wang, J., Perzynski, K., Hodgson, P.D., 2014, Numerical modeling of dual phase microstructure behavior under deformation conditions on the basis of digital material representation, Computational Materials Science, 95, 651-662.

Mahmoodkhani, Y., Wells, M.A., Parson, N., Poole, W.J., 2014, Numerical modeling of the material flow during extrusion of aluminum alloys and transverse weld formation, Journal of Materials Processing Technology, 214, 3, 688-700.

Malinowski, Z., Madej, W., Musiał, A., Hajduk, Z., Wolski, A., 2005, Design of manufacturing of welding neck type – rings, Metallurgy and foundry engineering, 31, 2, 201- 210.

Malwad, D.S., Nandedkar, V.M., 2014, Deformation mechanism analysis of single point incremental sheet metal forming, Procedia Materials Science, 6, 1505-1510.

Matsumoto, R., Hayashi, K., Utsunomiya, H., 2014, Experimental and numerical analysis of friction in high aspect ratio combined forward-backward extrusion with retreat and advanced pulse ram motion on a servo press, Journal of Materials Processing Technology, 214, 4, 936- 944.

Merklein, M., Johannes, M., Lechner, M., Kuppert, A., 2014, A review on tailored blanks – production, applications and evaluation, Journal of Materials Processing Technology, 214, 2, 151-164.

Moumi, E., Ishkina, S., Kuhfuss, B., Hochrainer, T., Struss, A.,

Hunkel, M., 2014, 2D-simulation of material flow during infeed rotary swaging using finite element method, Procedia Engineering, 81, 2342-2347.

Muszka, K., Madej, L., Majta, J., 2013, The effects of deformation and microstructure inhomogeneities in the Ac- cumulative Angular Drawing (AAD), Materials Science and Engineering A, 574, 68-74

Nam, C., Lee, M., Eom, J., Choi, M., Joun, M., 2014, Finite element analysis model of rotary forging for assembling wheel hub bearing assembly, Procedia Engineering, 81, 2475-2480.

Nowak, J., Madej, L., Ziolkiewicz, S., Plewinski, A., Grosman, F., Pietrzyk, M., 2008, Recent development in orbital forging technology, International Journal of Material Forming, 1, 387-390.

Obayi, C.S., Tolouei, R., Paternoster, C., Turgeon, S., Okorie, B.A., Obikwelu, D.O., Cassar, G., Buhagiar, J., Manto- vani, D., 2015, Influence of cross-rolling on the micro- texture and biodegradation of pure iron as biodegradable material for medical implants, Acta Biomaterialia, in press, online available 13.03.2015, http://dx.doi.org/10.1016/j.actbio.2015.01.024

Oczoś, K.E., Kawalec, A., Kształtowanie metali lekkich, Wydawnictwo Naukowe PWN, 2012, Warszawa (in Polish).

Parvizi, A., Abrinia, K., 2014, A two-dimensional upper bound analysis of the ring rolling process with experimental and FEM verifications, International Journal of Mechanical Sciences, 79, 176-181.

Pesin, A., Pustovoytov, D., 2014, Finite element modeling of edge defect formation in plate rolling, Procedia Engineering, 81, 132-136.

Petrenko, A., Mocilan, M., Soukup, J., 2014, Analysis of core stress during casting, Procedia Engineering, 96, 362- 369.

Poniatowska, M., 2015, Free-form surface machining error compensation applying 3D CAD machining pattern model, Computer-Aided Design, 62, 227-235.

Qiu, C., Yue, S., Adkins, N.J.E., Ward, M., Hassanin, H., Lee, P.D., Withers, P.J., Attallah, M.M., 2015, Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting, Materials Science and Engineering A, 628, 188-197.

Rotella, G., Umbrello, D., 2014, Numerical simulation of surface modification in dry and cryogenic machining of AA7075 alloy, Procedia CIRP, 13, 327-332.

Schongen, F., Klocke, F., Mattfeld, P., Rjasanow, S., Grzhibovski, R., 2014, FEM/BEM simulation of cold forging – 309 process considering press-tool-workpiece interaction, Procedia Engineering, 81, 2403-2408.

Senthil, R., Gnanavelbabu, A., 2014, Numerical analysis on formability of AZ61A magnesium alloy by incremental forming, Procedia Engineering, 97, 1975-1982.

Seo, S., Kim, I., Jo, C., Ogi, K., 2007, Grain structure prediction of Ni-base superalloy castings using the cellular automaton-finite element method, Materials Science and Engineering A, 449-451, 713-176.

Smojver, I., Ivancevic, D., 2010, Numerical simulation of bird strike damage prediction in airplane flap structure, Com- posite Structures, 92, 9, 2016-2026.

Sohlberg, B., 2005, Hybrid grey box modelling of pickling process, Control Engineering Practice, 13, 9, 1093- 1102.

Song, H., Zhang, S., Cheng, M., 2014, Dynamic globularization prediction during cogging process of large size TC11 titanium alloy billet with lamellar structure, Defense Technology, 10, 1, 40-46.

Stanistreet, T.F., Allwood, J.M., Willoughby, A.M., 2006, The design of a flexible model ring rolling machine, Journal of Materials Processing Technology, 177, 630-633.

Sun, Q., Chen, J., Li, X., Pan, H., 2014, Parametric study of edge crack of silicon steel strip in cold rolling based on a shear modified GTN damage model, Procedia Materials Science, 3, 1632-1637.

Szyndler, J., Grosman, F., Tkocz, M., Madej, L., 2015, Numerical and experimental investigation of the innovatory incremental forming process dedicated for the aerospace industry, Metallurgical and Materials Transactions A, in press.

Szyndler, J., Madej, L., 2015, Material model development for numerical simulation of the incremental forming process, Conf. Mat. of CMM 21 International Conference on Computer Methods in Mechanics, in press.

Tingting, Z., Guoning, R., Jinhua, P., 2014, Numerical simulation of three-dimensional flow fields for extrusion process of GR-35 double-base propellant, Procedia Engineering, 84, 920-926.

Watson, M., Long, H., 2014, Wrinkling failure mechanics in metal spinning, Procedia Engineering, 81, 2391-2396.

Wengfei, P., Wenjing, Y., Sijia, J., Xuedao, S., Baoshou, S.,

Yuzhen, L., Lihua, Z., 2014, Analysis of cross wedge rolling of spiral shaft parts, Procedia Engineering, 81, C 322-327. N

Wiślicki, T., 1964, Technologia budowy płatowców, Wydawnictwa Naukowo – Techniczne, Warszawa (in Polish).

Wong, C.C., Dean, T.A., Lin, J., 2004, Incremental forming of L A solid cylindrical components using flow forming princi- R ples, Journal of Materials Processing Technology, 153– A 154, 60-66. M

Xia, Q., Xiao, G., Long, H., Cheng, X., Sheng, X., 2014, A N review of process advancement of novel metal spinning, International Journal of Machine Tools and Manufac- D O ture, 85, 100-121. H

Xiaotao, G., Fan, Y., 2012, Research of PEEQ for conical ring M with outer steps ring rolling, Physics Procedia, 25, 257- 261. R

Yoon, S.J., Yangl D.Y., 2005, An incremental roll forming U P process for manufacturing doubly curved sheets from M general quadrilateral sheet blanks with enhanced process O C features, CIRP Annals – Manufacturing Technology, 54, 221-224. –

Zahalka, M., 2014, Modal analysis of hydraulic press frames for open die forging, Procedia Engineering, 69, 1070-1075.

Zenia, S., Ben Ayed, L., Nouaru, M., Delameziere, A., 2015, Numerical prediction of the chip formation process and induced damage during the machining of carbon/epoxy composites, International Journal of Mechanical Sci- ences, 90, 89-101.

Zhang, Q., Jin, K., Mu, D., Ma, P., Tian, J., 2014, Rotary swag- ing forming process of tube workpieces, Procedia Engi- neering, 81, 2336-2341.