Numerical simulation of viscoelastic effects in blade-over-roll coating forming flows

by

Numerical simulation of viscoelastic effects in blade-over-roll coating forming flows

Evan Mitsoulis

School of Mining Engineering and Metallurgy,,National Technical University of Athens, Zografou 157 80, Athens, GREECE.

DOI:

https://doi.org/10.7494/cmms.2010.3.0300

Abstract:

Computer simulations of the blade-over-roll coating process so far have been based mostly on Newtonian or generalized Newtonian models, which do not take into account the viscoelasticity of coating materials. Strong viscoelastic effects can influence both the flow characteristics in a blade nip and the coating film thickness. Because of limitations of the constitutive equation which describes coating materials, comparisons of simulation results with experiments had limited success. We have simulated the coating process with a fixed blade using the finite element method (FEM). Newtonian data are well reproduced by using a full two-dimensional model with realistic boundary conditions. For the case of viscoelastic fluids, i.e., polymer solutions with either a constant viscosity (Boger fluids) or a shear-thinning one, we used an integral constitutive equation of the K-BKZ type. Key characteristics of the K-BKZ model are that it accounts for a spectrum of multiple relaxation parameters and a fading memory. Numerical results accurately predict the coating film thicknesses from experiments reported in the literature. For a given geometry and speed, the film thickness decreases with increasing viscoelastic behavior. This is particularly evident when comparing the film thicknesses of the Newtonian and Boger fluids. Results show that the K-BKZ viscoelastic model is adequate to capture memory phenomena associated with the strain history of homogeneous polymeric coating materials, and can have application to simulating paper coating dispersions.

Cite as:

Mitsoulis, E., (2010). Numerical simulation of viscoelastic effects in blade-over-roll coating forming flows. Computer Methods in Materials Science, 10(3), 156 – 166. https://doi.org/10.7494/cmms.2010.3.0300

Article (PDF):

Keywords:

Coating flows, Blade-and-roll coating, K-BKZ constitutive equation, Viscoelasticity, Rheology

References:

Ansari, M., Alabbas, A., Hatzikiriakos, S.G., Mitsoulis, E., 2010, Entry flow of polyethylene melts in tapered dies, Intern. Polym. Proc., 25, 287-296.

Barakos, G., Mitsoulis, E., 1995, Numerical simulation of extrusion through orifice dies and prediction of Bagley correction for an IUPAC-LDPE melt, J. Rheol, 39, 193-209.

Bernstein, B., Kearsley, E.A., Zapas, L., 1963, A study of stress relaxations with finite strain, Trans. Soc. Rheol., 1, 391-410.

Boger, D.V., 1977/1978, A highly elastic constant-viscosity fluid, J. Non-Newtonian Fluid Mech., 3, 87-91.

Dupont, S., Crochet, M.J., 1988, The vortex growth of a KBKZ fluid in an abrupt contraction, J. Non-Newtonian Fluid Mech., 29, 81-91.

Greener, Y., Middleman, S., 1974, Blade coating of a viscoelastic fluid, Polym. Eng. Set, 14, 791-797.

Hsu, T.C., Malone, M., Laurence, R.L., 1985, A solver for time-dependent viscoelastic fluid-flows, J. Non-Newtonian Fluid Mech., 18,273-294.

Hsu, T.C., 1986, A study of the role of fluid viscoelasticity in the dynamics of bounded coating flows, PhD Dissertation, University of Massachusetts, MA, USA.

Kajiwara, T., Barakos, G., Mitsoulis, E., 1995, Rheological characterization of polymer solutions and melts with an integral constitutive equation, Int. J. Polymer Analysis & Characterization, 1, 201 -215.

Keunings, R., 2003, Finite element methods for integral viscoelastic fluids, Rheology Reviews, eds, Binding, D.M., Walters, K., British Society of Rheology, London, UK, 167-195.

Kistler, S.F., Scriven, L.E., 1984, Coating flow theory by finite element and asymptotic analysis of the Navier-Stokes system, Int. J. Num. Meth. Fluids, 4, 207-229.

Loest, H., Lipp, R., Mitsoulis, E., 1994, Numerical flow simulation of viscoplastic slurries and design criteria for a tape casting unit, J. Amer. Ceram. Soc, 77, 254-262.

Luo, X.-L., Mitsoulis, E., 1990a, An efficient algorithm for strain history tracking in finite element computations of non-Newtonian fluids with integral constitutive equations, Int. J. Num. Meth. Fluids, 11, 1015-1031.

Luo, X.-L., Mitsoulis, E., 1990b, A numerical study of the effect of elongational viscosity on vortex growth in contraction flows of polyethylene melts, J. Rheol, 34, 309-342.

Luo, X.-L., Tanner, R.I., 1986, A streamline element scheme for solving viscoelastic flow problems, Part II. Integral constitutive models, J. Non-Newtonian Fluid Mech., 22, 61-89.

Luo, X.-L., Tanner, R.I., 1988, Finite element simulation of long and short circular die extrusion experiments using integral models, Int. J. Num. Meth. Eng., 25, 9-22.

Mitsoulis, E., 1990, Numerical simulation of viscoelastic fluids, Encyclopedia of Fluid Mechanics, 9, Polymer Flow Engineering, eds, Cheremisinoff, N.P., Gulf Publ. Co., Dallas, Texas, USA, 649-704.

Mitsoulis, E., 2010, Extrudate swell of Boger fluids, J. Non-Newtonian Fluid Mech., 165, 812-824.

Mitsoulis, E., Athanasopoulos, G., 2010, Numerical simulation of blade-over-roll coating forming flows, Comp. Meth. Mater. Sci., 10 (4), 214-224.

Mitsoulis, E., Hatzikiriakos, S.G., 2003, Bagley correction: The effect of contraction angle and its prediction, Rheol. Acta, 42, 309-320.

Mitsoulis, E., Wagner, R., Heng, F.L., 1988, Numerical simulation of wire-coating low-density polyethylene: theory and experiments, Polym. Eng. Sci., 28, 291-310.

Olsson, F., 1994, A solver for time-dependent viscoelastic fluid-flows, J. Non-Newtonian Fluid Mech., 51, 309-340.

Olsson, F., Isaksson, P., 1995, The influence of viscoelastic rheology on blade coating as revealed by numerical methods, Nordic Pulp Paper Res. J., 10, 234-244.

Papanastasiou, A.C., Scriven, L.E., Macosko, C.W., 1983, An integral constitutive equation for mixed flows: viscoelastic characterization, J. Rheol, 27, 387-410.

Park, H.J., Mitsoulis, E., 1992, Numerical Simulation of Circular Entry Flows of Fluid Ml Using an Integral Constitutive Equation, J. Non-Newtonian Fluid Mech., 42, 301-314.

Stronger, M.R., Secor, R.B., Sramek, R.J., 1992, Knife coating of viscoelastic material, 6th International Coating Process Science and Technology Symposium, AIChE National Meeting, 112-113.

Sullivan, T., 1986, An experimental and computational investigation of rheological effects in blade coating, PhD Thesis, University of California, San Diego, CA, USA.

Sullivan, T., Middleman, S., 1986, Film thickness in blade coating of viscous and viscoelastic liquids, J. Non-Newtonian Fluid Mech., 21, 13-38.

Sullivan, T., Middleman, S., Keunings, R., 1987, Use of a finite-element method to interpret rheological effects in blade coating, AIChE J., 33, 2047-2056.

Sun, J., Phan-Thien, N., Tanner, R.I., 1996a, An adaptive viscoelastic stress splitting scheme and its applications: AVSS/SI and AVSS/SUPG, J. Non-Newtonian Fluid Mech., 65, 75-91.

Sun, J., Phan-Thien, N., Tanner, R.I., 1996b, Extrudate swell through an orifice die, Rheol. Acta, 35, 1-12.