Identification of the static recrystallization cellular automata model parameters based on inverse analysis

Mateusz Sitko¹ , Łukasz Madej¹, Roman Kuziak²

¹Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, 30 Mickiewicza Ave., 30-059 Kraków, Poland.
²Institute for Ferrous Metallurgy, 12-14 Karola Miarki St., 44-100 Gliwice, Poland.

DOI:

https://doi.org/10.7494/cmms.2014.4.0492

Abstract:

Development of the inverse algorithm for identification of the discrete cellular automata model of the static recrystallization based on the particle swarm optimization method is the main aim of the work. First, the idea of the inverse analysis approach is presented. Then subsequent modules of the algorithm are discussed, namely: direct problem model, experimental setup and optimization algorithm. The optimization part is realized by the basic variant of particle swarm optimization (PSO) method. Finally, examples of identified model parameters are presented and obtained results of recrystallized microstructures are compared with the experimental data.

Cite as:

Sitko, M., Madej, Ł., & Kuziak, R. (2014). Identification of the static recrystallization cellular automata model parameters based on inverse analysis. Computer Methods in Materials Science, 14(4), 206 – 214. https://doi.org/10.7494/cmms.2014.4.0492

Article (PDF):

Keywords:

Inverse Analysis, Cellular Automata, Particle Swarm Optimization, Static Recrystallization

Publication dates:

Received: 31.10.2014, accepted: 17.12.2014, published:

Publication type:

Original scientific paper

References:

Das, S., 2010, Modeling mixed microstructures using a multi- level cellular automata finite element framework, Computational Materials Science, 47, 705-711.

Gao, W., Liu, S-Y., Huang, L-L., 2012, Particle swarm optimization with chaotic opposition-based population initialization and stochastic search technique, Communications in Nonlinear Science and Numerical Simulation, 17, 4316-4327.

Gołąb, R., Sitko, M., Madej, Ł., 2014, Modeling of the microstructure evolution using cellular automata framework and Workflow approach, Key Engineering Materials, 611-612, 497-504.

Hallberg, H., Wallin, M., Ristinmaa, M., 2010, Simulation of discontinuous dynamic recrystallization in pure Cu using a probabilistic cellular automaton, Computational Materials Science, 49, 25-34.

Kugler, G., Turk, R., 2006, Study of the influence of initial microstructure topology on the kinetics of static recrystallization using a cellular automata model, Computational Materials Science, 37, 284-291.

Madej, L., Rauch, L., Perzyński, K., Cybułka, P., 2011, Digital Material Representation as an efficient tool for strain in- homogeneities analysis at the micro scale level, Archives C of Civil and Mechanical Engineering, 11, 661-679. N

Madej, L., Sieradzki, L., Sitko, M., Perzyński, K., Radwański, C K., Kuziak, R., 2013, Multi-scale cellular automata and finite element-based model for cold deformation and annealing of a ferritic-pearlitic microstructure, Computational Materials Science, 77, 172-181. A

Muhammad, I., Rathiah, H., Noor A.K.E., 2013, An overview of M particle swarm optimization variants, Procedia Engineering, 53, 491-496.

Popova, E., Staraselski, Y., Brahme, A., Mishra, R.K., Inal, K., 2014, Coupled crystal plasticity – probabilistic cellular H automata approach to model dynamic recrystallization in M magnesium alloys, International Journal of Plasticity, R DOI: 10.1016/j.ijplas.2014.04.008.

Raghavan, S., Satyam, S.S., 2009, Modeling the topological U P features during grain growth by cellular automaton, M Computational Materials Science, 46, 92-99.

Seyed Salehi, M., Serajzadeh, S., 2012, Simulation of static recrystallization in non-isothermal annealing using – a coupled cellular automata and finite element model, Computational Materials Science, 53, 145-152.

Sieradzki, L., Madej, L., 2013, A perceptive comparison of the cellular automata and Monte Carlo techniques in appli- cation to static recrystallization modeling in polycrystal- line materials, Computational Materials Science, 67, 156-173.

Sukhopar, O., Gottstein, G., 2012, Modeling Recrystallization in Al Alloys: Investigation of Nucleation at Cube Bands, Materials Science Forum, 715-716, 455-460.

Svyetlichnyy, D.S., 2013, Modeling of grain refinement by cellular automata, Computational Materials Science, 77, 408-416.

Szeliga, D., Gawąd, J., Pietrzyk, M., 2004, Parameters identifi- cation of material models based on the inverse analysis, International Journal of Applied Mathematics and Com- puter Science., 14, 549-556.

Szeliga, D., Gawad, J., Pietrzyk, M., 2006, Inverse analysis for identification of rheological and friction models in metal forming, Computer Methods in Applied Mechanics and Engineering, 195, 6778-6798.

Wang, H., Li, G.Y., Zhong, Z.H., 2008, Optimization of sheet metal forming processes by adaptive response surface based on intelligent sampling method, Journal of Materials Processing Technology, 197,77-88.

Yu-Zhen, Y.U., Xin-Yi, R.E.N., Feng-Shan, D.U., Jun-Jie, S.H.I., 2012, Application of improved PSO algorithm in hydraulic pressing system identification, Journal of Iron and Steel Research, International, 19, 29-35.

Zheng, C., Raabe, D., Li, D., 2012, Prediction of post-dynamic austenite-to-ferrite transformation and reverse transformation in a low-carbon steel by cellular automaton modeling, Acta Materialia, 60, 4768-4779.

Zhiwen, L., Hongrui, C., Xuefeng, C., Zhengjia, H., Zhongjie, S., 2013, Multi-fault classiﬁcation based on wavelet SVM with PSO algorithm to analyze vibration signals from rolling element bearings, Neurocomputing, 99, 399-410.